Contact Us

Tel:+86-510-83399593

Fax:+86-510-83398797

Mob:+8615240459921

E-mail: csbella@163.com

Add: No.11 Youxin Road, Qianzhou North Industry Zone, Huishan District, Wuxi City, Jiangsu Province

Home > News > Content
Easy To Use, Low Labor Elasticity, Good Operating Environment May 03, 2018

Vacuum rake dryer use:

It is applicable to the drying of all materials with different states and properties. It is especially suitable for materials that are not resistant to high temperatures, dry oxidation or flammable and explosive materials, as well as the need to recover solvents during the drying process and to produce dry dust. Different nature and process requirements, the aircraft needs to be equipped with dry dust collectors. Wet dust collectors, condensers, condensate tanks, vacuum pumps, etc. constitute a drying unit operation, at the same time, the machine can also be used for the mixing of solid materials and liquid materials Heating reaction and mixed heating of solid material and solid material.

Vacuum rake dryer main heat source:

Steam, hot water, heat transfer oil.

Typical processing materials:

CMC, dyestuff intermediates. Salicylic acid, rubber additives, maltodextrin, pharmaceutical intermediates, hydrazine, sodium acrylate, indigo, reduced olive green R, caprolone, diaminostilbene Oh, wait.

The main performance characteristics of dental dryer

1,equipment, strong applicability, wide range of applications. When the equipment is heated and dried under vacuum conditions, the vaporization temperature of the solvent can be reduced. Therefore, it can be adapted to almost all materials with different state properties. Particularly suitable for heat-sensitive materials and the need for solvent recovery sites.

2, the product quality is good, the material in the drying process, the use of positive and negative rotation of the tooth sleeve continuously updated interface, so that the material is heated evenly to avoid overheating of the material.

3, easy to operate. The machine is easy to operate, with low labor elasticity and good operating environment.