Contact Us

Tel:+86-510-83399593

Fax:+86-510-83398797

Mob:+8615240459921

E-mail: csbella@163.com

Add: No.11 Youxin Road, Qianzhou North Industry Zone, Huishan District, Wuxi City, Jiangsu Province

Ceramic Cyclone Spray Dryer

Ceramic Cyclone Spray Dryer

Ceramic cyclone spray dryer introduction Ceramic cyclone spray dryer is the most widely used process in the liquid process molding and drying industry. Suited for generated from solutions, emulsions, suspensions, and plasticity paste liquid raw material in powder, particulate or solid block...

InquiryChat Now

  • Product Details

Ceramic cyclone spray dryer introduction

Ceramic cyclone spray dryer is the most widely used process in the liquid process molding and drying industry. Suited for generated from solutions, emulsions, suspensions, and plasticity paste liquid raw material in powder, particulate or solid block products. Thus, when the finished product particle size distribution, residual moisture content, bulk density and particle shapes must meet precise criteria. The spray drying is an ideal process.

图片1.jpg

Ceramic cyclone spray dryer Technical parameters

图片2.jpg

Dry product samples:

图片3.jpg 图片4.jpg

Work principle of Ceramic cyclone spray dryer

图片5.jpg

Ceramic cyclone spray dryer characteristics

1.Drying speed is fast, solid-liquid surface area greatly increased after the spraying in the hot air flow, the moment can be evaporated moisture of 95% -98%, and only a few seconds to complete the drying time, especially for heat-sensitive materials drying.

2.The product has good uniformity, mobility and solubility products of high purity, good quality.

3.The production process is simplified, convenient control. For special materials for a moisture content of 40-60% (90%) of the liquid can be dried into a powder or grain products, after drying without crushing and screening, to reduce the production processes, to improve product purity.

4.On product particle size, bulk density, moisture, within a certain range by changing the operating conditions to adjust, control and management is easy.

i ceramic spray dryer  ceramic spray dryer ceramic spray dryer

(A) material parameters

1. water evaporation: 5kg / h

2.Inlet air temperature:150-300 ℃

3.Outlet air temperature:80-90 ℃

4. Heating: electric heating

(B) operating parameters

1.Inlet air temperature :150-300 ℃ (automatic control regulation)

2.Outlet air temperature :80-90 ℃

3.System air pressure: -258 to-239pa

4. System air volume: 150-250m3 / h

5. Finished recovery rate: 99%

6.Power consumption: 17.5KW / h

7.Total installed capacity: 17.5KW

8.Emissions:direct emissions after the cyclone dust collector

图片6.jpg

图片7.jpg

Company Profile 

Our factory has more than 20 years working experiences on researching and selling. Products are well sailed all over the world, got many compliments from customers.

图片8.jpg

Customers in the world

图片9.jpg

FAQ

1.Q: Can I mix different models in one container?

A: Yes, different models can be mixed in one container, but the quantity of each model should not be less than MOQ.

2.Q:What's your warranty terms? 

A: We offer different warranty time for different products. Please contact with us for detailed warranty terms.

3. Q: Do you have the products in stock?

A: No. All driers are to be produced according to your order.

图片10.jpg

Hot Tags: ceramic cyclone spray dryer, China, manufacturers, suppliers, custom, cheap
  • Feedback